leadwork yorkshire

The

Lead Flashings

Lead

Lead Roofing

Lads ®

Proper Leadwork

Specialist Leadwork Contractors for Lead Roofing, Lead Flashings & Repairs

The Lead Lads® are specialist leadwork contractors undertaking traditional and modern lead roofing, lead flashings, chimney weatherings, valleys, gutters, flat roofs, repairs and bespoke welded details. From localised lead flashing repairs to complete lead roofing schemes, we approach every project with close attention to thermal movement, bay sizing, fixings, substrates, falls and long-term weathering performance. Our work is informed by recognised proper leadwork practice, including the relevant principles and recommendations of BS 6915. 👨🏻‍🔧 Plumbum Recte

View Leadwork Service Areas

Proper Leadwork Is All in the Detail

Leadwork offers exceptional durability, adaptability and architectural character, but it only performs properly when every part of the detail is designed and installed correctly. Excessive bay sizes, restricted thermal movement, unsuitable lead codes, weak fixings, poor laps and badly formed junctions can all cause premature failure. For that reason, we assess the complete leadwork arrangement rather than treating an individual joint or flashing in isolation.

We design, install and repair lead roofing, flat roof bays, lead flashings, valleys, gutters, chimney details, parapets, dormers and bespoke weathering features. Each project requires the correct balance of material code, bay sizing, falls, drips, rolls, fixings, ventilation and movement control. That same disciplined approach applies whether we are working on a home, church, listed building, commercial property or contemporary construction project.

Ars Plumbi Recta

Request a Leadwork Quote

Since 2011

Specialist Leadwork for Projects of Every Size

Since 2011, our team has undertaken specialist leadwork across residential, commercial, ecclesiastical, heritage and high-value buildings. Our work ranges from localised lead flashing repairs and chimney weatherings to complete lead roofs, valleys, gutters, dormers, flat roof bays and complex welded details.

Whether a project involves a single defective junction, a full lead flat roof, a lead valley repair, a traditional roll detail or bespoke lead fabrication, we apply the same principles of proportion, movement control, workmanship and long-term durability. The finished leadwork should not merely resist water; it should look correct, weather naturally and remain serviceable over time.

View Leadwork Projects Request a Quote

We undertake traditional and contemporary lead roofing, including flat roof bays, dormers, canopies and complex roof forms. Bay sizes, rolls, drips, substrates, falls and thermal movement are considered as part of the complete roof design.

Our lead flashing work includes chimney aprons, soakers, stepped flashings, cover flashings, abutments, parapets and roof junctions. Each detail is formed to suit the roof covering, masonry, exposure and anticipated movement.

Proper leadwork depends on sound design as well as skilled installation. We consider lead code, bay dimensions, fixings, ventilation, substrate preparation, welding and weathering details using recognised good practice.

3897+

Metres of Lead Used

4

Specialist Lead Workers

118+

Leadwork Quotes

Quotations for Specialist Leadwork, Roofing & Repairs

We provide clear, no-obligation quotations for specialist leadwork, including lead roofing, flat roofs, valleys, gutters, chimney details, lead flashings, repairs and bespoke welded work. Each quotation explains the proposed scope, likely detailing requirements and the labour and materials involved.

For technically involved or defective leadwork, an inspection may be required before a reliable repair or replacement strategy can be prepared. This helps distinguish isolated defects from wider issues involving bay sizes, thermal movement, falls, substrates, fixings or previous workmanship.

Contact The Lead Lads Request a Quote

Specialist Leadwork Services — Lead Roofing, Flashings, Repairs & Surveys

We undertake specialist leadwork across complete roofs and individual weathering details, including lead roofing, lead flashings, chimney work, valleys, gutters, flat roofs, repairs and lead welding. Whether you require a survey, technical advice, a repair quotation or a complete new installation, we assess the detail as part of the wider roof construction and apply recognised proper leadwork principles.

Book a Leadwork Survey View Leadwork Projects

Lead Flashing Repair

We repair stepped, apron, cover and abutment flashings to stop water ingress and restore proper weather protection. The repair strategy considers lead code, laps, fixings, movement and the condition of the adjoining masonry and roof covering.

Chimney Lead Flashing

We form chimney aprons, soakers, stepped flashings, cover flashings, back gutters and saddles to suit the chimney, roof pitch and surrounding covering. Performance, movement and appearance are considered together.

Lead Roof Repair

From split bays and failed joints to ponding, fatigue, worn outlets and defective perimeter details, we investigate the cause of failure and recommend a proportionate repair or replacement strategy.

Lead Valley Repair

Lead valleys require suitable material code, support, laps, drips, width and allowance for movement. We tailor each repair or replacement detail to the roof pitch, exposure, drainage area and adjoining covering.

Lead Flat Roofs

We install and repair lead flat roofs, bays, canopies and dormer coverings, with close attention to bay dimensions, falls, ventilation, substrate preparation, drips, rolls and thermal movement.

Lead Welding

We carry out lead welding for seams, corners, outlets, sumps, chutes and specialist weathering details. Preparation, material compatibility, joint design and safe hot-work procedures are considered throughout.

Why Choose Specialist Leadwork Contractors?

Lead is one of the most durable and adaptable roofing materials available, but its performance depends on correct design, preparation and workmanship. Specialist leadwork contractors understand thermal movement, bay sizing, lead codes, fixings, rolls, drips, welts, welded details, substrate requirements and the way lead interfaces with masonry, slate, tile and other roofing systems.

At The Lead Lads®, we approach lead roofing, lead flashings, valleys, gutters, repairs and bespoke details as parts of one technical discipline. Our objective is proper leadwork that is visually sharp, technically sound and capable of weathering successfully for decades.

3 of these completed in Wakefield West Yorkshire this week. #Leadwork
50 5 instagram icon
It’s never straight forward is it 😅#Leadwork
167 3 instagram icon
More photos to come from this job once completed. But he’s a quick picture. Large Lead bay window, with internal code 5 T-pren gutter with flashings, code 5 welted cornice with drip edge and code 5 lead bays. Will upload some more detailed pictures on completion. #leadwork #lead #roofing #restoration
72 3 instagram icon

Specialist Leadwork, Lead Roofing & Lead Flashing FAQs

What does specialist leadwork include?

Specialist leadwork can include complete lead roofs, flat roof bays, lead flashings, valleys, gutters, dormers, canopies, parapets, chimney details, decorative features, repairs and welded fabrications. The correct approach depends on the building, exposure, roof form, materials and required service life.

Lead flashings weather junctions where roofs meet walls, chimneys, parapets, abutments and other changes in construction. Common details include aprons, soakers, stepped flashings, cover flashings, back gutters and saddles.

Well-designed and properly installed leadwork can remain serviceable for many decades and may exceed 50 years. Its lifespan depends on suitable lead code, bay sizing, thermal movement, fixings, substrates, falls, ventilation, workmanship and maintenance.

Common causes include excessive bay sizes, restricted thermal movement, unsuitable lead code, poor fixings, inadequate laps, weak substrates, insufficient falls, defective welding and badly designed junctions. Visible splits are often symptoms of a wider detailing problem.

Some defects can be repaired locally where damage is isolated and the surrounding lead remains serviceable. Where failure results from fatigue, poor bay design, widespread splitting or unsuitable detailing, partial or complete replacement may provide the more reliable solution.

Yes. We undertake complete lead roofs as well as lead flashings, chimney details, valleys, gutters, flat roofs, repairs and bespoke welded leadwork. Projects range from small domestic repairs to substantial heritage and specialist roofing schemes.

Our leadwork is informed by recognised proper leadwork practice, including the relevant principles and recommendations of BS 6915. These include considerations such as material selection, bay dimensions, movement, fixings, substrates, detailing and workmanship.

Latest Leadwork Advice, News & Projects

Summer Lead Roof Maintenance Guide | Heat, Expansion & Flashing Checks

The Lead Lads ® Lead Roof Guide Summer Maintenance Summer Lead Roof Maintenance Guide Summer [...]

The Lead Lads ® Launch UK Franchise Model to Raise Standards in Specialist Leadwork

Latest News The Lead Lads® Launch UK Franchise Model A controlled expansion designed to professionalise [...]

#Proper Leadwork: Spring Lead Roof Inspections—How to Spot Movement, Fatigue & Failure After Winter

The Lead Lads ® Lead Roof Guide Spring Inspection Spring Lead Roof Inspections — How [...]

Lead Roof Ventilation & Condensation: Warm vs Cold

#Proper Leadwork: Lead Ventilation & Condensation—Warm vs Cold Roof Strategies Interstitial condensation is one of [...]

Lead Ridge & Verge Detailing: Ridges, Verges & Abutments

#Proper Leadwork: Edge-to-Edge Detailing—Ridges, Verges & Abutments without Stress Ridges and verges frame the roofline. [...]

Lead Upstands & Drips: Heights & Edge Geometry

#Proper Leadwork (2026): Upstands & Drips—Heights, Throatings & Edge Geometry Welcome to the New Year [...]

Lead Soakers: Sizing, Gauges & Interfaces

#Proper Leadwork: Lead Soakers—Sizing, Gauges & Interfaces with Slate and Tile Discreet but essential, lead [...]

Lead Cappings to Masonry: Cornices & Cills

#Proper Leadwork: Cornices, Cappings & Cills—Fixing to Masonry without Cracks Beautiful façades deserve durable lead [...]